BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY


    1. Loosen the nut and remove the negative (-) battery terminal from the battery.

    2. A01V8E5

      Remove the nut.

    3. Remove the battery current sensor assembly and No. 3 engine wire from the negative (-) battery terminal.

    4. A01V7IHC02
      *1 No. 3 Engine Wire

      Disconnect the connector from the battery current sensor assembly.

    5. Remove the battery current sensor assembly from the No. 3 engine wire.