PANORAMIC VIEW MONITOR SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure as for the RHD and LHD vehicles.

  • The procedure listed below is for the LHD vehicles.

PROCEDURE


  1. INSTALL TELLTALE LIGHT ASSEMBLY (CLEARANCE SONAR MAIN SWITCH)


    1. Connect the connector.

    2. Attach the claw and 2 clips to install the telltale light assembly (clearance sonar main switch).

  2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here