PANORAMIC VIEW MONITOR SWITCH REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time maybe required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE TELLTALE LIGHT ASSEMBLY (CLEARANCE SONAR MAIN SWITCH)


    1. A01V6Q3

      Detach the 2 clips and claw and remove the telltale light assembly (clearance sonar main switch).

    2. A01V7WO

      Disconnect the connector.