BLIND SPOT MONITOR MAIN SWITCH(for RHD) INSTALLATION

PROCEDURE

1. INSTALL TELLTALE LIGHT ASSEMBLY (BLIND SPOT MONITOR MAIN SWITCH)

   
   

   1. Connect the connector.

   2. Attach the claw and 2 clips to install the telltale light assembly (blind spot monitor main switch).

2. INSTALL CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here