PARKING ASSIST ECU INSTALLATION

PROCEDURE


  1. INSTALL PARKING ASSIST ECU


    1. A01QQNR

      Temporarily install nut (A) so that the nut cannot fall, but do not tighten it.

    2. Connect the 2 connectors.

    3. A01QQ3P

      Insert nut (A) into the hole in the body and slide downward to temporarily install the parking assist ECU.

    4. Temporarily install the 2 nuts.

    5. Install the parking assist ECU with the 3 nuts.

      Tech Tips

      Tighten the nuts in the order shown in the illustration.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  3. INSTALL DECK TRIM SERVICE HOLE COVER

    Click here

  4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  5. INSTALL REAR DOOR SCUFF PLATE RH

    Tech Tips

    Use the same procedure described for the LH side.

    Click here

  6. INSTALL REAR SEAT ASSEMBLY (for RH Side)

    Click here

  7. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    Click here

  8. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

    Click here

  9. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Spare Tire)

    Click here

  10. INSTALL REAR NO. 2 FLOOR BOARD

    Tech Tips

    Use the same procedure described for the No. 3 rear floor board side.

    Click here

  11. INSTALL DECK BOARD ASSEMBLY

    Click here

  12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  13. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here