ULTRASONIC SENSOR(for Rear) INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 ULTRASONIC SENSOR


    1. Attach the 4 claws to install the No. 2 ultrasonic sensor as shown in the illustration.

      A01VAC9

      Note


      • A01V7YWC01
        *a No. 2 ultrasonic sensor direction
        *b Keyhole direction

        The No. 2 ultrasonic sensor direction is the same as the keyhole direction.

      • Do not damage the bumper when inserting the No. 2 ultrasonic sensor.

      Tech Tips


      • The illustration shows the No. 2 ultrasonic sensor for the LH corner and back sensor RH. The horizontal orientation of the No. 2 ultrasonic sensor for the RH corner and back sensor LH is opposite that of the image shown in the illustration.

      • Use the same procedure for all No. 2 ultrasonic sensors.

  2. INSTALL ULTRASONIC SENSOR CLIP

    Tech Tips


    • The illustration shows the ultrasonic sensor clip for the RH. The horizontal orientation of the ultrasonic sensor clip for the LH is opposite that of the image shown in the illustration.

    • Use the same procedure for both ultrasonic sensor clips.


    1. Attach the clamp.

    2. Attach the 2 claws to install the ultrasonic sensor clip.

  3. INSTALL REAR BUMPER COVER

    Click here