ULTRASONIC SENSOR(for Rear) INSTALLATION

PROCEDURE

1. INSTALL NO. 3 ULTRASONIC SENSOR

   
   

   1. Attach the 4 claws to install the No. 3 ultrasonic sensor as shown in the illustration.

      

      Note

      
      

      • 

        *a	No. 3 ultrasonic sensor direction
        *b	Keyhole direction

        No. 3 ultrasonic sensor direction is the same as the keyhole direction.

      • Do not damage the bumper when inserting the No. 3 ultrasonic sensor.

2. INSTALL NO. 2 LUGGAGE ROOM WIRE

   Note

   
   

   • When connecting the wire harness to the No. 3 ultrasonic sensor, hold the sensor from bumper surface.

   • After connecting the wire harness to the No. 3 ultrasonic sensor, push the sensor from the bumper surface.

   
   

   1. Attach the 6 clamps to install the No. 2 luggage room wire.

   2. w/o Rear Fog Light:

      Connect the 4 connectors.

   3. w/ Rear Fog Light:

      Connect the 6 connectors.

3. INSTALL REAR BUMPER COVER

   Click here

4. INSTALL REAR QUARTER PANEL MUDGUARD RH (w/ Mudguard)

   Click here

5. INSTALL REAR QUARTER PANEL MUDGUARD LH (w/ Mudguard)

   Click here