BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1AB7

DTC Code DTC Name
C1AB7 Blind Spot Monitor Slave Module

DESCRIPTION

This DTC is stored when the blind spot monitor sensor RH detects an internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1AB7 Blind Spot Monitor Slave Module The blind spot monitor sensor RH (slave) detects an internal malfunction. Blind spot monitor sensor RH

CAUTION / NOTICE / HINT

Note

When checking for DTCs, make sure that the blind spot monitor main switch (warning cancel switch assembly*1 or telltale light assembly*2) is on.


  • *1: for LHD

  • *2: for RHD

PROCEDURE


  1. CHECK DTC


    1. Clear the DTCs.

      Click here


      Body Electrical > Blind Spot Monitor Slave > Clear DTCs

    2. Recheck for DTCs and check if the same DTC is output again.

      Click here


      Body Electrical > Blind Spot Monitor Slave > Trouble Codes
      Result
      Proceed to
      No DTCs are output
      DTCs are output

    No DTCs are output

    USE SIMULATION METHOD TO CHECK Click here

    DTCs are output

    REPLACE BLIND SPOT MONITOR SENSOR RH Click here