BLIND SPOT MONITOR SYSTEM, Diagnostic DTC:C1A45

DTC Code DTC Name
C1A45 Vehicle Speed Sensor

DESCRIPTION

The blind spot monitor sensor receives vehicle speed signals from the brake actuator assembly via CAN communication.

DTC No. Detection Item DTC Detection Condition Trouble Area
C1A45 Vehicle Speed Sensor A fail flag is transmitted from the brake actuator assembly.

  • Vehicle stability control system

  • Blind spot monitor sensor LH

  • Blind spot monitor sensor RH

CAUTION / NOTICE / HINT

Note

When checking for DTCs, make sure that the blind spot monitor system is on.

PROCEDURE


  1. CHECK OTHER DTC OUTPUT (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for vehicle stability control system DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Proceed to
      Vehicle stability control system DTCs are not output
      Vehicle stability control system DTCs are output

    Vehicle stability control system DTCs are output

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    Vehicle stability control system DTCs are not output

  2. CHECK DTC


    1. Clear the DTCs.

      Click here


      Chassis > ABS/VSC/TRC > Clear DTCs

    2. Recheck for DTCs and check if the same DTC is output again.

      Click here


      Chassis > ABS/VSC/TRC > Trouble Codes
      Result
      Proceed to
      No DTC is output
      DTC is output from the blind spot monitor sensor LH (master)
      DTC is output from the blind spot monitor sensor RH (slave)

    No DTC is output

    USE SIMULATION METHOD TO CHECK Click here

    DTC is output from the blind spot monitor sensor LH (master)

    REPLACE BLIND SPOT MONITOR SENSOR LH Click here

    DTC is output from the blind spot monitor sensor RH (slave)

    REPLACE BLIND SPOT MONITOR SENSOR RH Click here