PARKING ASSIST MONITOR SYSTEM(for Camera built-in ECU), Diagnostic DTC:C1691

DTC Code DTC Name
C1691 Back Camera Initialization Incomplete

DESCRIPTION

This DTC is stored when the television camera assembly judges that the back camera initial setting has not been memorized (back camera position setting is incomplete).

DTC No. Detection Item DTC Detection Condition Trouble Area
C1691 Back Camera Initialization Incomplete Back camera initial setting has not been memorized (back camera position setting is incomplete)

  • Back camera position setting

  • Television camera assembly

CAUTION / NOTICE / HINT

Note

Depending on the parts that are replaced or operations that are performed during vehicle inspection or maintenance, calibration of other systems as well as the parking assist monitor system may be needed.

Click here

PROCEDURE


  1. ADJUST SETTINGS (BACK CAMERA POSITION SETTING)


    1. Perform the following procedure depending on the memory conditions to register the vehicle information into the television camera assembly.


      1. Back camera position setting.

        Click here

      Result
      Proceed to
      NEXT

    NEXT

  2. CHECK DTC


    1. Clear the DTCs.

      Click here


      Chassis > IPA/Parking Assist Monitor > Clear DTCs

    2. Check for DTCs.

      Click here


      Chassis > IPA/Parking Assist Monitor > Trouble Codes

      Tech Tips


      • If DTC C1691 is output, perform the back camera position setting again.

      • If DTC C1691 is still output after performing the back camera position setting 3 times, replace the television camera assembly.

      Result
      Proceed to
      DTC C1691 is not output
      DTC C1691 is output.

    DTC C1691 is not output

    END

    DTC C1691 is output.

    REPLACE TELEVISION CAMERA ASSEMBLY Click here