| DTC Code | DTC Name |
|---|---|
| HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
Tech Tips
Use the following procedure to troubleshoot the Toyota parking assist-sensor system.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| Result | ||
|---|---|---|
|
| NEXT |
|
CUSTOMER PROBLEM ANALYSIS
| Result | ||
|---|---|---|
|
| NEXT |
|
INSPECT BATTERY VOLTAGE
Measure the battery voltage with the ignition switch off.
| Standard voltage |
|---|
| 11 to 14 V |
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
| Result | ||
|---|---|---|
|
| NEXT |
|
PROBLEM SYMPTOM CONFIRMATION
| Result | |||
|---|---|---|---|
|
| Symptom occurs |
|
GO TO STEP 6 Click here |
| Symptom does not occur |
|
SYMPTOM SIMULATION
Refer to Symptom Simulation.
| Result | ||
|---|---|---|
|
| NEXT |
|
PROBLEM SYMPTOMS TABLE
Refer to the Problem Symptoms Table.
| Result | |||
|---|---|---|---|
|
| Fault is listed in Problem Symptoms Table |
|
GO TO STEP 8 Click here |
| Fault is not listed in Problem Symptoms Table |
|
PERFORM TROUBLESHOOTING BASED ON MALFUNCTION SYMPTOM
| Result | ||
|---|---|---|
|
| NEXT |
|
CIRCUIT INSPECTION
| Result | ||
|---|---|---|
|
| NEXT |
|
IDENTIFICATION OF PROBLEM
| Result | ||
|---|---|---|
|
| NEXT |
|
REPAIR OR REPLACE
| Result | ||
|---|---|---|
|
| NEXT |
|
CONFIRMATION TEST
| Result | ||
|---|---|---|
|
| NEXT |
|
END |