HARD DISK DRIVE REMOVAL

PROCEDURE


  1. PRECAUTION

    Note


    • After turning the engine switch off, waiting time maybe required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

      Click here

    • Precautions for the multi-media module receiver assembly and hard disc.

      Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE CENTER NO. 1 INSTRUMENT CLUSTER FINISH PANEL

    Click here

  4. REMOVE NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  5. REMOVE NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. REMOVE TELLTALE LIGHT ASSEMBLY

    Click here

  7. REMOVE NAVIGATION ECU SUB-ASSEMBLY

    Click here

  8. REMOVE NO. 1 RADIO BRACKET

    Click here

  9. REMOVE HARD DISC


    1. A00YSF1

      Remove the 2 screws.

    2. A00YXJZ

      Move the cover in the direction of the arrow shown in the illustration to remove it.

    3. A00YSZ4

      Remove the hard disc in the direction of the arrow shown in the illustration.