NAVIGATION ECU INSTALLATION

PROCEDURE


  1. INSTALL NAVIGATION ECU


    1. Connect the connector.

    2. Attach the clamp to install the antenna cord.

    3. A01V78J

      Attach the 2 guides to install the navigation ECU as shown in the illustration.

  2. INSTALL NO. 1 RADIO BRACKET


    1. except 7 inch Type


      1. Install the No. 2 radio bracket with the 5 screws.

    2. for 7 inch Type


      1. Install the No. 2 radio bracket with the 5 screws.

  3. INSTALL NO. 2 RADIO BRACKET


    1. except 7 inch Type


      1. Install the No. 2 radio bracket with the 5 screws.

    2. for 7 inch Type


      1. Install the No. 2 radio bracket with the 5 screws.

  4. INSTALL WIRE HARNESS


    1. Connect each connector to install the wire harness.

  5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY (for Radio and Display Type)

    Click here

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here