NAVIGATION SYSTEM(for Radio and Display Type) Display does not Dim when Light Control Switch is Turned ON

PROCEDURE


  1. CHECK IMAGE QUALITY SETTING


    1. Display the "Display" screen.

    2. Turn the light control switch to the tail or head position.

    3. Check if "Day Mode" on the display adjustment screen is on.

      OK
      "Day Mode" setting is off
      Result
      Proceed to
      OK
      NG

    NG
    OK
  2. CHECK VEHICLE SIGNAL (OPERATION CHECK)


    1. A01GCS5

      Enter the "Vehicle Signal Check Mode" screen. Refer to Check Vehicle Signal in Operation Check.

      Click here

    2. Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.

      OK
      Light Control Switch Display
      Tail or head ON
      Off OFF

      Tech Tips

      This display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.

    3. Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.

      OK
      Light Control Switch Display
      Tail or head DIM
      Off BRIGHT
      Result
      Proceed to
      OK
      NG

    OK
    NG