AMPLIFIER ANTENNA REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE NO. 1AMPLIFIER ANTENNA ASSEMBLY


    1. A01V802

      Disconnect the connector.

    2. A01V7QR

      Remove the bolt and then remove the washer and holder.

    3. A01VAGY

      Remove the No. 1 amplifier antenna assembly of the vehicle outside.

  5. REMOVE ANTENNA COVER KIT


    1. A01V822N01

      Detach the claws and guides and remove the No. 1 amplifier antenna assembly as indicated by the arrows in the order shown in the illustration.

    2. When reusing the No. 1 amplifier antenna assembly:


      1. A01V7T8

        Remove the seal.