NOISE FILTER INSTALLATION

PROCEDURE


  1. INSTALL RADIO SETTING CONDENSER


    1. A01QP24

      Attach the claw to install a new terminal cover to the wire harness.

      Note


      • Make sure to hold the crimping side of the terminal when installing the wire harness to the terminal cover.

      • Make sure not to bend the exposed wire when installing the wire harness to the terminal cover.

      • Do not use excessive force when inserting the wire harness into the terminal cover.

      • If the terminal cover has been deformed at installation, replace the terminal and terminal cover with new ones.

    2. A01QOGG

      Attach the 3 claws to install the new terminal cover with wire harness to a new condenser.

      Note


      • Do not use excessive force when inserting the terminal cover into the condenser.

      • If the terminal cover has been deformed at installation, replace the terminal, terminal cover and condenser with new ones.

    3. Attach the clamp to temporarily install a new radio setting condenser with wire harness.

    4. Install the new radio setting condenser with the bolt.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

    Click here

  3. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

    Click here

  4. INSTALL REAR DOOR SCUFF PLATE LH

    Click here

  5. INSTALL REAR SEAT ASSEMBLY


    1. for LH:

      Click here

    2. for RH:

      Click here

  6. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE


    1. w/o Spare Tire, for Compact Spare Tire:

      Click here

    2. w/ Full Size Spare Tire:

      Click here

  7. INSTALL REAR DECK TRIM COVER (w/ Full Size Spare Tire)

    Click here

  8. INSTALL REAR FLOOR FINISH PLATE (w/o Spare Tire, for Compact Tire)

    Click here

  9. INSTALL DECK FLOOR BOX LH

    Click here

  10. INSTALL DECK BOARD ASSEMBLY (w/ Full Size Spare Tire)

    Click here

  11. INSTALL DECK BOARD ASSEMBLY (w/o Spare Tire, for Compact Tire)

    Click here

  12. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  13. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here