RADIO ANTENNA CORD(for Instrument Panel Side) INSTALLATION

PROCEDURE

1. INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)

   
   

   1. w/ Navigation System or w/ Digital Audio Broadcasting:

      
      

      1. Attach the 6 clamps to install the antenna cord sub-assembly.

   2. w/o Navigation System:

      
      

      1. Attach the 4 clamps to install the antenna cord sub-assembly.

   3. Attach the claw.

   4. Connect each connector.

2. INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)

   
   

   1. Attach the 4 clamps to install the antenna cord sub-assembly.

   2. Attach the claw.

   3. Connect each connector.

3. INSTALL UPPER INSTRUMENT PANEL

   Click here

4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

   Click here

5. CHECK SRS WARNING LIGHT

   Click here