RADIO ANTENNA HOLDER REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE ROOF HEADLINING ASSEMBLY

    Click here

  4. REMOVE ROOF ANTENNA POLE SUB-ASSEMBLY

    Click here

  5. REMOVE WITH HOLDER ANTENNA ASSEMBLY


    1. A01KDE2

      Disconnect the connector.

    2. Remove the nut.

    3. A01KAS3

      Detach the 2 claws and remove the with holder antenna assembly.