INSTRUMENT PANEL SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

    2. Install the front No. 2 speaker assembly with the 2 bolts.

      Torque:
      12.5 N*m  { 127 kgf*cm, 9 ft.*lbf }

  2. INSTALL NO. 2 SPEAKER HOLE COVER


    1. A01CX9T

      Attach the 2 guides, 2 clips and 2 claws to install the No. 2 speaker hole cover.