INSTRUMENT PANEL SPEAKER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE NO. 2 SPEAKER HOLE COVER


    1. A01CXZ8C02
      A01CYHM Protective Tape

      Apply protective tape as shown in the illustration.

    2. Using moulding remover B, detach the 2 clips, 2 claws and 2 guides and remove the No. 2 speaker hole cover.

  2. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Remove the 2 bolts and front No. 2 speaker assembly.

      A01CXGEC01
      *A w/ Woofer *B w/o Woofer

    2. Disconnect the connector.