FRONT DOOR SPEAKER INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY

    Note

    Do not touch the cone part of the speaker.


    1. Connect the connector.

      A01CY77C01
      *A w/o Woofer *B w/ Woofer
    2. Install a nose piece to an air riveter or hand riveter. Then insert the mandrel part of a new φ4 mm waterproof rivet into the nose piece.

    3. Using an air riveter or hand riveter, install the front No. 1 speaker assembly with 3 new rivets.

      Note


      • A01CY7NC05
        *1 Mandrel
        *2 Riveter
        *a INCORRECT
        *b CORRECT

        Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

      • A01CW0SC05
        *1 Riveter
        *a INCORRECT
        *b CORRECT

        Confirm that the rivets are seated properly against the speaker.

      • Do not tilt the riveter when installing the rivet to the speaker.

      • Do not leave any space between the rivet head and speaker.

      • A01CYOCC04
        *1 Riveter
        *a INCORRECT
        *b CORRECT

        Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.

  2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH

    Click here

  3. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH

    Click here

  4. INSTALL FRONT DOOR ASSIST GRIP COVER LH

    Click here

  5. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

    Click here

  6. INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Passenger Side)

    Click here

  7. INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH

    Click here