STEREO COMPONENT AMPLIFIER INSTALLATION

PROCEDURE


  1. INSTALL NO. 2 AMPLIFIER BRACKET


    1. Install the No. 2 amplifier bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  2. INSTALL NO. 1 AMPLIFIER BRACKET


    1. Install the No. 1 amplifier bracket with the 2 screws.

      Torque:
      3.0 N*m  { 31 kgf*cm, 27 in.*lbf }

  3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY


    1. A01QUJVC02
      *1 Guide
      A01QRKS Bolt
      A01QOU0 Connector

      Attach the 2 guides to temporarily install the stereo component amplifier assembly with bracket.

    2. Install the stereo component amplifier assembly with bracket with the 3 bolts.

      Tech Tips

      Tighten the bolts in the order shown in the illustration.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

    3. Connect the 2 connectors.

  4. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

  5. INSTALL REAR SEAT ASSEMBLY


    1. for LH:

      Click here

    2. for RH:

      Click here

  6. INSTALL REAR NO. 1 FLOOR MAT SUPPORT SIDE PLATE

    Click here

  7. INSTALL REAR FLOOR FINISH PLATE (for Compact Spare Tire)

    Click here

  8. INSTALL REAR DECK TRIM COVER (for Full Size Spare Tire)

    Click here

  9. INSTALL DECK BOARD ASSEMBLY

    Click here

  10. INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

  11. INSTALL PACKAGE TRAY TRIM POCKET SUB-ASSEMBLY (w/ Partition Net)

    Click here

  12. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

    Click here

  13. INSTALL REAR DOOR SCUFF PLATE RH

    Click here