RADIO RECEIVER INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 RADIO BRACKET


    1. Install the No. 1 radio bracket with the 3 screws.

  2. INSTALL NO. 2 RADIO BRACKET


    1. Install the No. 2 radio bracket with the 3 screws.

  3. INSTALL RADIO RECEIVER ASSEMBLY


    1. Connect each connector.

    2. Attach the 4 clips to install the radio receiver assembly with bracket.

    3. Install the 4 bolts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }
  4. INSTALL TELLTALE LIGHT ASSEMBLY

    Click here

  5. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  6. INSTALL NO. 4 INSTRUMENT PANEL REGISTER ASSEMBLY

    Click here

  7. INSTALL NO. 1 CENTER INSTRUMENT CLUSTER FINISH PANEL

    Click here

  8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here