AUDIO AND VISUAL SYSTEM(for Radio and Display Type) CD Sound Skips

PROCEDURE


  1. CHECK CD


    1. A01QSA5

      Check that the CD is not deformed or cracked.

      Result
      Proceed to
      No deformation or cracks on the CD
      Deformation or cracks on the CD

    Deformation or cracks on the CD

    END (CD IS DEFECTIVE)

    No deformation or cracks on the CD

  2. CHECK CD


    1. A01QQ8T

      Check the CD.

      Note

      Do not use a conventional record cleaner or antistatic preservative.

      Tech Tips

      If dirt is on the CD surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      Result
      Proceed to
      The CD is clean
      The CD is not clean

    The CD is not clean

    END (CD IS DEFECTIVE)

    The CD is clean

  3. CHECK CD


    1. Replace the CD with a known good one and check that the malfunction disappears.

      Result
      Proceed to
      Malfunction disappears
      Malfunction appears

    Malfunction disappears

    END (CD IS DEFECTIVE)

    Malfunction appears

  4. CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY


    1. Check the radio and display receiver assembly installation condition.


      1. Check that the radio and display receiver assembly is properly installed.

        OK
        The radio and display receiver assembly is properly installed.
      Result
      Proceed to
      OK
      NG

    OK

    REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY Click here

    NG

    REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY