STEERING GEAR DISASSEMBLY

PROCEDURE


  1. FIX STEERING GEAR ASSEMBLY


    1. A00YUCGC01
      *a Protective tape

      Using SST, fix the power steering gear assembly.

      Tech Tips

      Apply protective tape to SST before use.

      SST
      09612-00012

  2. REMOVE TIE ROD END SUB-ASSEMBLY LH


    1. A00YR0OC01
      *a Matchmark

      Put matchmarks on the tie rod end sub-assembly LH and rack end.

    2. Remove the tie rod end sub-assembly LH and lock nut.

  3. REMOVE TIE ROD END SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. REMOVE STEERING RACK BOOT CLIP


    1. Using pliers, remove the 2 steering rack boot clips.

  5. REMOVE NO. 2 STEERING RACK BOOT CLAMP


    1. A00YUUA

      Using a screwdriver, remove the No. 2 steering rack boot clamp.

      Note

      Be careful not to damage the steering rack boot.

  6. REMOVE NO. 1 STEERING RACK BOOT CLAMP

    Tech Tips

    Use the same procedure described for the No. 2 steering rack boot clamp.

  7. REMOVE NO. 2 STEERING RACK BOOT


    1. Remove the No. 2 steering rack boot.

  8. REMOVE NO. 1 STEERING RACK BOOT


    1. Remove the No. 1 steering rack boot.