STEERING PAD SWITCH INSTALLATION

PROCEDURE

1. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Attach the 6 claws and 2 pins to install the pad switch assembly.

   2. Install the 2 screws.

   3. Connect the connector to the spiral cable.

      Tech Tips

      If the vehicle is equipped with a cruise control switch and shift paddle switch, connect their connectors and connector clamps.

2. INSTALL STEERING PAD

   for Single Type: Click here

   for Dual Type: Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

4. CHECK SRS WARNING LIGHT

   w/ Occupant Classification System: Click here

   w/o Occupant Classification System: Click here