STEERING WHEEL INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL TRANSMISSION SHIFT SWITCH ASSEMBLY (w/ Shift Paddle Switch)

   Click here

2. INSTALL STEERING WHEEL BOSS LOWER COVER

   
   

   1. w/o Shift Paddle Switch

      
      

      1. Attach the 2 guide pins and 4 claws to install the lower cover.

   2. w/ Shift Paddle Switch

      
      

      1. Attach the 2 guide pins and 2 claws to install the lower cover.

      2. Install the 2 screws.

3. INSTALL STEERING PAD SWITCH ASSEMBLY

   
   

   1. Attach the 6 claws and 2 pins to install the steering pad switch assembly.

   2. Install the 2 screws.

   3. Connect the connector to the spiral cable.

      Tech Tips

      If the vehicle is equipped with a shift paddle switch, connect the connector and the connector clamp.

4. INSTALL CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)

   
   

   1. Install the cruise control switch wire to the cruise control main switch.

5. INSTALL CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

   Click here

6. PLACE FRONT WHEELS FACING STRAIGHT AHEAD

7. ADJUST SPIRAL CABLE

   for Single Type: Click here

   for Dual Type: Click here

8. INSTALL STEERING WHEEL ASSEMBLY

   
   

   1. Align the matchmarks on the steering wheel assembly and steering main shaft.

   2. Install the steering wheel assembly set nut.

      Torque:

      50 N*m  { 510 kgf*cm, 37 ft.*lbf }

   3. Connect the connectors to the spiral cable sub-assembly.

9. INSTALL STEERING PAD

   for Single Type: Click here

   for Dual Type: Click here

10. INSPECT STEERING WHEEL CENTER POINT

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

12. CHECK SRS WARNING LIGHT

    w/ Occupant Classification System: Click here

    w/o Occupant Classification System: Click here