PARKING BRAKE SWITCH INSTALLATION

PROCEDURE

1. INSTALL PARKING BRAKE SWITCH ASSEMBLY

   
   

   1. Install the parking brake switch with the screw.

      Torque:

      0.9 N*m  { 9 kgf*cm, 8 in.*lbf }

   2. Connect the parking brake switch connector.

2. INSPECT BRAKE WARNING LIGHT

   
   

   1. Operate the parking brake lever and check the illumination condition of the brake warning light.

      OK
      The brake warning light always illuminates at the first click.

3. INSTALL REAR CONSOLE BOX ASSEMBLY

   Click here