PARKING BRAKE ASSEMBLY DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE PARKING BRAKE SHOE ADJUSTING HOLE PLUG

  3. REMOVE REAR DISC

    Click here

  4. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Upper Side)


    1. A01QOV8

      Using needle-nose pliers, remove the 2 shoe return tension springs.

  5. REMOVE PARKING BRAKE SHOE STRUT LH

  6. REMOVE PARKING BRAKE SHOE RETURN TENSION SPRING (for Lower Side)


    1. Using needle-nose pliers, remove the shoe return tension spring.

  7. REMOVE PARKING BRAKE SHOE ADJUSTING SCREW SET


    1. Remove the shoe adjusting screw set.

  8. REMOVE NO. 1 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01QUA9

      Press the shoe hold-down spring to remove the shoe hold-down spring pin, shoe hold-down spring and No. 1 parking brake shoe.

  9. REMOVE NO. 2 PARKING BRAKE SHOE ASSEMBLY LH


    1. A01QRKI

      Slide the shoe to remove the shoe hold-down spring, shoe hold-down spring pin and No. 2 parking brake shoe.

    2. Disconnect the parking brake cable from the parking brake shoe lever.

  10. REMOVE PARKING BRAKE SHOE LEVER LH