VACUUM PUMP(When Not Using the Engine Support Bridge for AD Series Engine) INSTALLATION

PROCEDURE


  1. INSTALL VACUUM PUMP ASSEMBLY


    1. A01QPXNC02
      *1 Oil Pipe
      *2 O-Ring

      Apply engine oil to the oil pipe at the tip of the vacuum pump.

    2. Coat 2 new O-rings with engine oil, and install them to the vacuum pump.

    3. A01QSJ5E01

      Install the vacuum pump so that the coupling teeth of the vacuum pump labeled A and the groove of the camshaft labeled B can engage.

    4. A01QOEJ

      Install 3 new flange bolts.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

    5. Connect the 2 vacuum hoses, and slide the clamp to secure it.

  2. INSTALL ENGINE WITH TRANSAXLE


    1. for 2AD-FTV:

      Click here

    2. for 2AD-FHV:

      Click here

  3. INSPECT VACUUM PUMP OPERATION

    Click here