BRAKE MASTER CYLINDER(for LHD) REASSEMBLY

CAUTION / NOTICE / HINT

Note


  • The master cylinder and piston are designed so that the piston can easily fall out. Prevent this by making sure the tip of the master cylinder points downward when handling the master cylinder.

  • Make sure foreign matter does not adhere to the piston of the master cylinder. If foreign matter adheres, clean it off with a cloth. Then apply lithium soap base glycol grease to the entire outer circumference contact surface area of the piston.

PROCEDURE


  1. INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER


    1. Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.

  2. INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY


    1. Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.

  3. INSTALL BRAKE FLUID INFORMATION LABEL

  4. INSTALL MASTER CYLINDER RESERVOIR GROMMET


    1. A00YSFMC01
      *1 Lithium soap base glycol grease

      Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets, and then install them to the brake master cylinder reservoir assembly.

  5. INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY


    1. Install the brake master cylinder reservoir to the brake master cylinder body.

  6. INSTALL BRAKE MASTER CYLINDER RING PIN


    1. Using a pin punch and hammer, install a pin to the brake master cylinder reservoir.