VSC OFF SWITCH INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY (VSC OFF SWITCH)


    1. A01PJGAC09
      *a

      Component without harness connected

      (Telltale Light Assembly (VSC OFF Switch))

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      6 (+) - 13 (E) Switch not pushed 10 kΩ or higher
      Switch pushed Below 1 Ω

      If the result is not as specified, replace the telltale light assembly (VSC OFF switch).