VSC OFF SWITCH INSPECTION

PROCEDURE


  1. CHECK TRACTION CONTROL SWITCH (VSC OFF SWITCH)


    1. A00YS7NC01
      *a Component without harness connected (VSC OFF Switch)
      *b Pushed
      *c Not pushed

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      3 (E) - 6 (+) Not pushed 10 kΩ or higher
      Pushed Below 1 Ω

      If the result is not as specified, replace the traction control switch (VSC OFF switch).