FRONT SPEED SENSOR REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedures listed below are for the LH side.

PROCEDURE


  1. REMOVE FRONT WHEEL

  2. REMOVE FRONT FENDER LINER LH


    1. Partially remove the front fender liner.

      Tech Tips

      It is not necessary to fully remove the fender liner. Partially remove it so that the speed sensor connector can be disconnected in a later step.

  3. REMOVE FRONT SPEED SENSOR LH


    1. A00YVQ5

      Disconnect the front speed sensor connector.

    2. A00YWD2E01

      Remove the sensor clip labeled A, bolt labeled B and sensor clamp labeled C.

    3. A00YXB2E01

      Remove the sensor clip labeled D, bolt labeled E and sensor clamp labeled F.

    4. A00YTEZ

      Remove the bolt and front speed sensor from the knuckle.

      Note

      Keep the sensor tip and sensor installation hole free from foreign matter.