BRAKE ACTUATOR(w/ VSC) REASSEMBLY

PROCEDURE


  1. INSTALL BRAKE ACTUATOR BOLT CUSHION


    1. Install the 4 brake actuator bolt cushions to the brake actuator bracket.

  2. INSTALL BRAKE ACTUATOR CASE COLLAR


    1. Install the 4 brake actuator case collars to the brake actuator bolt cushions.

      Note

      Make sure the collars are in full contact with the cushions.

  3. INSTALL BRAKE ACTUATOR BRACKET


    1. A00YTP6E01

      Install the brake actuator bracket to the brake actuator with the 4 bolts.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

      Note


      • Tighten the 4 bolts uniformly in alphabetical order.

      • If the actuator is dropped, replace it.