NAVIGATION SYSTEM(for HDD) Disc cannot be Inserted or is Ejected Right After Insertion

PROCEDURE


  1. CHECK IF A PROPER DISC IS INSERTED


    1. Make sure that the disc is an audio disc or a disc with an MP3 or WMA file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

      Tech Tips


      • Translucent or uniquely-shaped discs cannot be played.

      • CDs and DVDs with adhesive paper labels should not be played.

      • Commercial audio CDs and DVDs can be played.

      • CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • MP3 and WMA files on CD-ROMs, CD-Rs and CD-RWs can be played.

      • For details on playable CDs and DVDs, refer to the Owner's Manual.

      Result
      Proceed to
      Disc is normal
      Disc is not normal

    Disc is not normal

    CHANGE DISC

    Disc is normal

  2. CHECK THAT DISC IS INSERTED PROPERLY


    1. Check whether or not the disc is inserted upside down.

      Result
      Proceed to
      Disc is properly inserted
      Disc is not properly inserted

    Disc is not properly inserted

    SET DISC PROPERLY

    Disc is properly inserted

  3. CLEAN DISC AND RECHECK


    1. A01CYZM

      If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      Note

      Do not use a conventional record cleaner or anti-static preservative.

      Result
      Proceed to
      Malfunction disappears
      Malfunction does not disappear

    Malfunction disappears

    END (DISC WAS DIRTY)

    Malfunction does not disappear

  4. CHECK DISC


    1. Replace the disc with a known good one.

    2. Check that the malfunction disappears.

      Result
      Proceed to
      Malfunction disappears
      Malfunction does not disappear

    Malfunction disappears

    END (DISC IS DEFECTIVE)

    Malfunction does not disappear

    REPLACE NAVIGATION ECU SUB-ASSEMBLY Click here