REAR SHOCK ABSORBER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE REAR WHEEL

  2. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH


    1. A00YUFQ

      Support the rear No. 2 suspension arm with a jack using a wooden block to avoid damage.

      Note

      Do not excessively jack up the rear No. 2 suspension arm assembly LH.

      Tech Tips

      Support the rear shock absorber at a position where it compresses by approximately 20 to 30 mm (0.788 to 1.181 in.).

    2. A00YULU

      Remove the 2 bolts and disconnect the shock absorber with the rear shock absorber bracket.

    3. A00YVM0

      Remove the nut and bolt from the shock absorber upper side.

    4. Remove the shock absorber from the vehicle.

  3. REMOVE REAR SHOCK ABSORBER BRACKET LH


    1. A00YS8C

      Remove the nut and bolt from the bracket.