DIFFERENTIAL MOUNT CUSHION REMOVAL

PROCEDURE


  1. REMOVE REAR DIFFERENTIAL DYNAMIC DAMPER LH


    1. A01QU2Z

      Remove the 2 bolts and rear differential dynamic damper LH (front side) from the rear No. 1 differential support.

  2. REMOVE REAR DIFFERENTIAL DYNAMIC DAMPER RH


    1. A01QSLX

      Remove the 2 bolts and rear differential dynamic damper RH (front side) from the rear No. 2 differential support.

  3. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  4. REMOVE REAR SUSPENSION MEMBER SUB-ASSEMBLY

    Click here

  5. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 1 differential mount cushion.

      A01QTWEC03
      *1 Rear Suspension Member Sub-assembly - -
      A01QOU0 Front of Vehicle - -
      SST
      09316-12010

      Note


      • Do not bring SST into contact with the rear suspension member sub-assembly.

      • Before using SST, apply grease to SST bolt.

      • Set SST in the correct direction.

      • Do not tilt the bolt of SST.

      • Do not reuse the rear No. 1 differential mount cushion.