REAR DIFFERENTIAL CARRIER ASSEMBLY REMOVAL

PROCEDURE


  1. DRAIN DIFFERENTIAL OIL

    Click here

  2. REMOVE REAR WHEEL

  3. REMOVE FUEL TANK ASSEMBLY


    1. for 1AD-FTV:

      Click here

    2. for 2AD-FHV:

      Click here

    3. for 2AD-FTV:

      Click here

    4. for 2AR-FE:

      Click here

    5. for 3ZR-FAE:

      Click here

    6. for 3ZR-FE:

      Click here

  4. REMOVE EXHAUST PIPE ASSEMBLY


    1. for 1AD-FTV:

      Click here

    2. for 2AD-FHV:

      Click here

    3. for 2AD-FTV:

      Click here

    4. for 2AR-FE:

      Click here

    5. for 3ZR-FAE:

      Click here

    6. for 3ZR-FE:

      Click here

  5. REMOVE PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  6. REMOVE REAR SUSPENSION MEMBER BRACE LH

    A01GDB2

    1. Remove the 2 bolts and brace from the suspension member.

  7. REMOVE REAR SUSPENSION MEMBER BRACE RH

    Tech Tips

    Use the same procedure described for the LH side.

  8. REMOVE REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY


    1. A01GB8I

      Disconnect the 2 harness clamps.

    2. Disconnect the connector.

    3. REmove the bolt and wire harness clamp bracket.

    4. Remove the breather tube.

    5. A01GARFN01

      Support the rear differential carrier sub-assembly with a transmission jack or equivalent.

    6. Remove the 2 bolts labeled A and bolt labeled B.

    7. A01GCX9

      Slowly lower the jack and then tilt the rear differential carrier sub-assembly.

  9. REMOVE REAR DRIVE SHAFT ASSEMBLY LH

    Click here

  10. REMOVE REAR DRIVE SHAFT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  11. REMOVE REAR NO. 1 AND NO. 2 DIFFERENTIAL SUPPORT


    1. A01GCSF

      Remove the 4 bolts and rear No. 1 and No. 2 differential supports from the rear differential carrier.

  12. REMOVE REAR DIFFERENTIAL SUPPORT


    1. A01GCQ2

      Remove the 4 bolts and rear differential support from the rear differential carrier sub-assembly.