REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL REAR DIFFERENTIAL SIDE GEAR SHAFT OIL SEAL


    1. A01QR9ME01

      Using SST and a hammer, tap the new 2 rear differential side gear shaft oil seals into the rear differential carrier and differential side bearing retainer according to the specification.

      SST
      09223-00010
      Standard oil seal tapping amount (A value)
      7.2 +/-0.5 mm (0.283 +/-0.0197 in.)

      Note


      • Tap the oil seal uniformly so that the oil seal is straight.

      • Do not tap the oil seal in too far.

  2. INSTALL REAR DIFFERENTIAL CARRIER SUB-ASSEMBLY

    Click here

  3. ADD DIFFERENTIAL OIL

    Click here