REAR DIFFERENTIAL CARRIER OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL DIAPHRAGM OIL SEAL


    1. A01V7ZEC01
      *a Distance

      Using SST and a hammer, tap a new diaphragm oil seal into the rear differential carrier according to the specification.

      SST
      09710-30021   ( 09710-03121 )
      09950-60010   ( 09951-00570 )
      09950-70010   ( 09951-07100 )
      Standard distance (from theedge of the differential carrier sub-assembly)
      7.0 +/-0.5 mm (0.276 +/-0.0197 in.)

      Note


      • Tap the oil seal uniformly so that the oil seal is straight.

      • Do not tap the oil seal in too far.

  2. INSTALL TRANSMISSION COUPLING SHIM

    Click here

  3. INSTALL TRANSMISSION COUPLING CONICAL SPRING WASHER

    Click here

  4. INSTALL YOKE

    Click here

  5. INSTALL 4WD LINEAR SOLENOID

    Click here

  6. INSTALL TRANSMISSION COUPLING ASSEMBLY

    Click here

  7. INSTALL PROPELLER WITH CENTER BEARING SHAFT ASSEMBLY

    Click here

  8. ADD DIFFERENTIAL OIL

    Click here