STEERING KNUCKLE REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT AXLE HUB SUB-ASSEMBLY LH

    Click here

  2. REMOVE FRONT LOWER BALL JOINT ASSEMBLY LH

    Click here

  3. REMOVE STEERING KNUCKLE LH


    1. Secure the front axle assembly in a vise.

      Note

      When using a vise, do not overtighten it.

    2. A00YTA8

      Remove the 4 bolts and front axle hub sub-assembly from the steering knuckle.

      Note

      Do not place the hub and bearing's magnet rotor side so that it is facing downward, and do not allow the magnet rotor side to become damaged or contact foreign matter.

    3. Remove the front brake dust cover from the steering knuckle.