FRONT DRIVE SHAFT ASSEMBLY(for 2WD) COMPONENTS

ILLUSTRATION

A01QTF3C01
*A for 2WW - -
*1 NO. 1 ENGINE UNDER COVER *2 REAR ENGINE UNDER COVER LH
*3 REAR ENGINE UNDER COVER RH - -

ILLUSTRATION

A01QRJYC05
*A for 2AR-FE *B for Full Cover Type
*C for Half Cover Type - -
*1 NO. 1 ENGINE UNDER COVER *2 REAR ENGINE UNDER COVER LH
*3 REAR ENGINE UNDER COVER RH - -

ILLUSTRATION

A01QPFCC01
*A for 3ZR-FE - -
*1 NO. 1 ENGINE UNDER COVER *2 REAR ENGINE UNDER COVER LH
*3 REAR ENGINE UNDER COVER RH - -

ILLUSTRATION

A01QQWPC04
*1 FRONT AXLE SHAFT NUT LH *2 FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH
*3 FRONT SPEED SENSOR LH *4 FRONT STABILIZER LINK ASSEMBLY LH
*5 STEERING KNUCKLE WITH AXLE HUB LH *6 FRONT BRAKE FLEXIBLE HOSE
*a for Axle Hub Spline Diameter 26 mm (1.02 in.) *b for Axle Hub Spline Diameter 30 mm (1.18 in.)
A01QPB8 N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
A01QRKS MP grease A01QOL3 Do not apply lubricants to the threaded parts

ILLUSTRATION

A01QQUNC01
*A for 2WW - -
*1 FRONT DRIVE SHAFT ASSEMBLY LH *2 FRONT DRIVE SHAFT ASSEMBLY RH
*3 FRONT DRIVE SHAFT HOLE SNAP RING LH - -
A01QPB8 N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
A01QRKS MP grease - -

ILLUSTRATION

A01QP9LC01
*A for 2AR-FE *B for Automatic Transaxle
*C for Manual Transaxle - -
*1 FRONT DRIVE SHAFT ASSEMBLY LH *2 FRONT DRIVE SHAFT ASSEMBLY RH
*3 FRONT DRIVE SHAFT HOLE SNAP RING LH *4 DRIVE SHAFT BEARING BRACKET HOLE SNAP RING
A01QPB8 N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
A01QRKS MP grease - -

ILLUSTRATION

A01QRLBC01
*A for 3ZR-FE *B for Manual Transaxle
*C for CVT - -
*1 FRONT DRIVE SHAFT ASSEMBLY LH *2 FRONT DRIVE SHAFT ASSEMBLY RH
*3 FRONT DRIVE SHAFT HOLE SNAP RING LH - -
A01QPB8 N*m (kgf*cm, ft.*lbf): Specified torque Non-reusable part
A01QRKS MP grease - -

ILLUSTRATION

A01QUGBC01
*A for LH Side *B w/ Drive Shaft Damper
*C w/ 1 Clamp *D w/ 2 Clamps
*1 FRONT AXLE INBOARD JOINT BOOT *2 FRONT AXLE INBOARD JOINT BOOT CLAMP LH
*3 FRONT AXLE OUTBOARD JOINT BOOT *4 FRONT AXLE OUTBOARD JOINT BOOT CLAMP LH
*5 FRONT DRIVE INBOARD JOINT ASSEMBLY LH *6 FRONT DRIVE SHAFT DAMPER CLAMP LH
*7 FRONT DRIVE SHAFT DAMPER LH *8 FRONT DRIVE SHAFT DUST COVER LH
*9 FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP LH *10 FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP LH
*11 SNAP RING *12 TRIPOD JOINT
*13 FRONT DRIVE OUTBOARD JOINT SHAFT ASSEMBLY LH - -
Non-reusable part - -

ILLUSTRATION

A01QUMAC01
*A for RH Side *B w/ Drive Shaft Damper
*C w/o Drive Shaft Bearing Case *D w/ Drive Shaft Bearing Case
*E w/ 1 Clamp *F w/ 2 Clamps
*G for 2AR-FE, 3ZR-FE *H for 2WW
*1 DRIVE SHAFT BEARING CASE SUB-ASSEMBLY *2 FRONT AXLE INBOARD JOINT BOOT
*3 FRONT AXLE INBOARD JOINT BOOT CLAMP RH *4 FRONT AXLE OUTBOARD JOINT BOOT
*5 FRONT AXLE OUTBOARD JOINT BOOT CLAMP RH *6 FRONT DRIVE INBOARD JOINT ASSEMBLY RH
*7 FRONT DRIVE SHAFT BEARING *8 FRONT DRIVE SHAFT DAMPER CLAMP RH
*9 FRONT DRIVE SHAFT DAMPER RH *10 FRONT DRIVE SHAFT DUST COVER
*11 FRONT DRIVE SHAFT DUST COVER RH *12 FRONT NO. 2 AXLE INBOARD JOINT BOOT CLAMP RH
*13 FRONT NO. 2 AXLE OUTBOARD JOINT BOOT CLAMP RH *14 TRIPOD JOINT
*15 SNAP RING *16 FRONT DRIVE OUTBOARD JOINT SHAFT ASSEMBLY RH
Non-reusable part - -