4WD CONTROL ECU INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL 4WD ECU ASSEMBLY


    1. Install the 4WD ECU assembly with the bolt.

      Torque:
      11.5 N*m  { 117 kgf*cm, 8 ft.*lbf }

    2. Connect the connector.

  2. INSTALL HEATER TO REGISTER DUCT ASSEMBLY

    Click here

  3. INSTALL DEFROSTER NOZZLE ASSEMBLY

    Click here

  4. INSTALL UPPER INSTRUMENT PANEL

    Click here

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.