FRONT DIFFERENTIAL OIL SEAL(for RH Side) REPLACEMENT

PROCEDURE


  1. REMOVE TRANSFER ASSEMBLY

    Click here

  2. REMOVE FRONT DRIVE SHAFT OIL SEAL RH


    1. A01HIJ3C01
      *a Protective Tape

      Using a screwdriver with protective tape wound around the tip, pry out the front drive shaft oil seal RH.

      Note

      Do not damage the continuously variable transaxle assembly.

  3. REMOVE CVT TYPE T OIL SEAL

    A01HJXNN01

    1. Using SST, remove the CVT type T oil seal from the continuously variable transaxle assembly.

      SST
      09308-00010

      Note

      Do not damage the continuously variable transaxle assembly.

  4. INSTALL CVT TYPE T OIL SEAL


    1. Apply MP grease to the lip of a new CVT type T oil seal.

    2. A01HH73C01
      *a 21.5 to 22.5 mm (0.847 to 0.885 in.)

      Using SST and a hammer, install the CVT type T oil seal to the continuously variable transaxle assembly.

      SST
      09950-60010   ( 09951-00390 )
      09950-70010   ( 09951-07200 )
      Standard Depth
      21.5 to 22.5 mm (0.847 to 0.885 in.)

      Note

      Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

  5. INSTALL FRONT DRIVE SHAFT OIL SEAL RH


    1. Apply MP grease to the lip of a new front drive shaft oil seal RH.

    2. A01HHQJC03
      *a 5.5 to 6.5 mm (0.217 to 0.255 in.)

      Using SST and a hammer, install the front drive shaft oil seal RH to the continuously variable transaxle assembly.

      SST
      09515-87302
      Standard Depth
      5.5 to 6.5 mm (0.217 to 0.255 in.)

      Note


      • Be sure to install the front drive shaft oil seal RH in the correct direction.

      • Make sure to install the front drive shaft oil seal RH as specified, otherwise malfunctions such as a fluid leak will occur.

      • Do not damage the lip of the front drive shaft oil seal RH.

  6. INSTALL TRANSFER ASSEMBLY

    Click here