SHIFT LEVER REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.


  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE REAR CONSOLE BOX SUB-ASSEMBLY

    Click here

  2. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    1. Move the shift lever to N.

    2. A01QODE

      Disconnect the end of the transmission control cable assembly from the shift lever assembly.

    3. A01QT5HC01
      *1 Stopper
      *2 Nut

      Pull out the stopper of the transmission control cable assembly.

    4. Rotate the nut counterclockwise approximately 180° and, while holding the nut in that position, disconnect the transmission control cable assembly from the shift lever assembly.

      Note

      Do not over-rotate the nut as it will come off the internal spring and the transmission control cable assembly will not be reusable.

  3. REMOVE SHIFT LEVER ASSEMBLY


    1. Disconnect the 2 connectors and 4 clamps from the shift lever assembly.

      A01QSAHC01
      *A for LHD *B for RHD
    2. A01QS3V

      Remove the 4 bolts and shift lever assembly.