CONTINUOUSLY VARIABLE TRANSAXLE SYSTEM TERMINALS OF ECM


  1. ECM

    A01QRXDE06

    Tech Tips

    The standard voltage and resistance of each ECM terminal is shown in the table below.

    In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the terminals is shown under "Specified Condition".

    Use the illustration above as a reference for the ECM terminals.

    Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
    A62-2 (+B) - B75-16 (E1) R - BR Power source of ECM Ignition switch ON 11 to 14 V
    A62-3 (+B2) - B75-16 (E1) P - BR Power source of ECM Ignition switch ON 11 to 14 V
    B75-29 (+BM) - B75-16 (E1) L - BR Power source of throttle actuator Always 11 to 14 V
    A62-1 (BATT) - B75-16 (E1) W - BR Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
    A62-46 (MREL) - B75-16 (E1) P - BR EFI-MAIN No. 1 relay Ignition switch ON 11 to 14 V
    A62-9 (STP) - B75-16 (E1) L - BR Stop light switch signal Brake pedal depressed 11 to 14 V
    Brake pedal released Below 1.5 V
    A62-22 (STA) - B75-16 (E1) SB - BR Starter signal Cranking 5.5 V or higher
    A62-13 (CANH) - B75-16 (E1) Y - BR CAN communication line Ignition switch ON Pulse generation
    A62-26 (CANL) - B75-16 (E1) W - BR CAN communication line Ignition switch ON Pulse generation
    A62-42 (SFTU) - B75-16 (E1) LG - BR Up-shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
    Ignition switch ON and shift lever in "+" (up-shift) Below 1 V
    A62-43 (SFTD) - B75-16 (E1) Y - BR Down-shift position switch signal Ignition switch ON and shift lever in M 11 to 14 V
    Ignition switch ON and shift lever in "-" (down-shift) Below 1 V
    A62-41 (S) - B75-16 (E1) L - BR M position switch signal Ignition switch ON and shift lever in M 11 to 14 V
    Ignition switch ON and shift lever not in M Below 1 V
    A62-57 (PWMS) - B75-16 (E1) GR - BR Combination switch (SPORT) signal Ignition switch ON and combination switch (SPORT) off 11 to 14 V
    Ignition switch ON and combination switch (SPORT) on Below 1.5 V
    B75-63 (NSW) - B75-16 (E1) W - BR Park/neutral position switch signal Ignition switch ON and shift lever in P or N Below 2 V
    Ignition switch ON and shift lever not in P or N 11 to 14 V
    B75-99 (P) - B75-16 (E1) L - BR P position switch signal Ignition switch ON and shift lever in P 11 to 14 V
    Ignition switch ON and shift lever not in P Below 1 V
    B75-79 (R) - B75-16 (E1) R - BR R position switch signal Ignition switch ON and shift lever in R 11 to 14 V
    Ignition switch ON and shift lever not in R Below 1 V
    B75-97 (N) - B75-16 (E1) Y - BR N position switch signal Ignition switch ON and shift lever in N 11 to 14 V
    Ignition switch ON and shift lever not in N Below 1 V
    B75-81 (D) - B75-16 (E1) B - BR D position switch signal Ignition switch ON and shift lever in D or M 11 to 14 V
    Ignition switch ON and shift lever not in D or M Below 1 V
    B75-73 (SLS+) - B75-72 (SLS-) Y - L Shift solenoid valve SLS signal Engine idling Pulse generation
    B75-68 (SL) - B75-16 (E1) L - BR Shift solenoid valve SL signal Ignition switch ON and shift lever in N 11 to 14 V
    B75-70 (DS1) - B75-16 (E1) W - BR Shift solenoid valve DS1 signal Accelerator pedal released while driving with shift lever in D Pulse generation
    B75-69 (DS2) - B75-16 (E1) G - BR Shift solenoid valve DS2 signal Accelerator pedal depressed further after driving at constant vehicle speed with shift lever in D Pulse generation
    B75-71 (DSU) - B75-16 (E1) GR - BR Shift solenoid valve DSU signal Lock-up turned from off to on Pulse generation
    B75-95 (THO1) - B75-96 (ETHO) LG - BR CVT fluid temperature sensor signal CVT fluid temperature: 60 to 120°C (140 to 248°F) 0.2 to 1.0 V
    B75-89 (PTO) - B75-121 (EPTO) B - W Oil pressure sensor signal Engine idling and shift lever in P 0.8 to 1.2 V
    B75-120 (VCPT) - B75-121 (EPTO) R - W Power supply for oil pressure sensor signal Ignition switch ON 4.75 to 5.25 V
    B75-127 (NIN+) - B75-128 (NIN-) W - B Transmission revolution sensor (NIN) signal When driving with shift lever in D Pulse generation
    B75-125 (NTO) - B75-16 (E1) L - BR Transmission revolution sensor (NT) signal When driving with shift lever in D Pulse generation
    B75-126 (NTB) - B75-16 (E1) W - BR Power supply for transmission revolution sensor (NT) Ignition switch ON 11 to 14 V
    B75-129 (NOTO) - B75-16 (E1) W - BR Transmission revolution sensor (NOUT) signal When driving with shift lever in D Pulse generation
    B75-130 (NOTB) - B75-16 (E1) R - BR Power supply for transmission revolution sensor (NOUT) Ignition switch ON 11 to 14 V
    B75-16 (E1) - Body ground BR - Body ground Ground Always Below 1 Ω