COMBINATION SWITCH INSPECTION

PROCEDURE


  1. INSPECT COMBINATION SWITCH ASSEMBLY


    1. A00YTWRC03
      *a

      Component without harness connected

      (Combination Switch)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      2 (MSW1) - 4 (MSW2) Combination switch (SPORT) on Below 1 Ω
      2 (MSW1) - 4 (MSW2) Combination switch (SPORT) off 10 kΩ or higher

      If the result is not as specified, replace the combination switch assembly.