DECELERATION SENSOR INSTALLATION

PROCEDURE

1. INSTALL DECELERATION SENSOR

   
   

   1. Install the deceleration sensor with the 2 bolts.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

      Note

      
      

      • Do not damage the deceleration sensor.

      • Make sure that the deceleration sensor is installed securely.

   2. Connect the deceleration sensor connector.

2. INSTALL YAW RATE SENSOR BRACKET

   
   

   1. Install the bracket with the bolt.

      Torque:

      15 N*m  { 153 kgf*cm, 11 ft.*lbf }

3. INSTALL FRONT DOOR SCUFF PLATE LH

   Click here

4. INSTALL FRONT SEAT ASSEMBLY LH

   
   

   1. for Manual Seat:

      Click here

   2. for Power Seat:

      Click here

5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

6. INSPECT DECELERATION SENSOR SIGNAL

   Click here