SHIFT LEVER ASSEMBLY INSTALLATION

PROCEDURE

1. INSTALL FLOOR SHIFT SHIFT LEVER ASSEMBLY

   
   

   1. Install the floor shift shift lever assembly with the 4 bolts.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   2. for LHD:

      
      

      1. Attach the 2 wire harness clamps.

   3. for RHD:

      
      

      1. Attach the 3 wire harness clamps.

2. CONNECT TRANSAXLE CONTROL CABLE ASSEMBLY

   Click here

3. ADJUST TRANSAXLE CONTROL CABLE ASSEMBLY

   
   

   1. Adjust control cable.

      Click here

   2. For new shift lever:

      Remove the stopper pin and dispose of it.

4. INSTALL REAR CONSOLE BOX SUB-ASSEMBLY

   Click here